MURI Publications

Thrust 1 |  Thrust 2 | Thrust 3

Thrust 1

Journal Articles

Yang,J., Yang, Y., Waltermire1, S.W., Wu, X., Shang, H., Gutu, T., Jiang, Y., Chen, Y., Zinn, A. A., Prasher, R., Xu, T.T. and Li, D., “Enhanced and Switchable Nanoscale Thermal Conduction Due to Van der Waals Interfaces,” Nature Nanotechnology Letters, Vol 7, pp 91-95, (Dec 2011).

P.M. Norris, J.L. Smoyer, J.C. Duda, and P.E. Hopkins, “Prediction and Measurement of Thermal Transport Across Interfaces Between Isotropic Solids and Graphitic Materials,”Journal of Heat Transfer (Dec 2011)

J.C. Duda, P.E. Hopkins, T.E. Beechem, J.L. Smoyer, and P.M. Norris, “Inelastic Phonon Interactions at Solid-Graphite Interfaces,” Superlattices and Microstructures47, 550-555 (2010).

J.C. Duda, P.E. Hopkins, J.L. Smoyer, M.L. Bauer, T.E. English, C.B. Saltonstall, and P.M. Norris, “On the Assumption of Detailed Balance in Prediction of Diffusive Transmission Probability During Interfacial Transport,”Nanoscale and Microscale Thermophysical Engineering, 14, 21-33 (2010).

P.E. Hopkins, T.E. Beechem, J.C. Duda, J.L. Smoyer, and P.M. Norris, “Effects of Sub-Conduction Band Excitations on Thermal Conductance at Metal-Metal Interfaces,” Applied Physics Letters,96, 011907 (2010).

Wang,Y.,  Park, J.Y., Koh, Y.K., and Cahill, D.G., “Thermoreflectance of Metal Transducers for Time-Domain Thermoreflectance,”  Journal of Applied Physics, 108, 043507  (2010).

Koh, Y.K., Bae. M., Cahill, D.G., and Pop, E., “Heat Conduction across Monolayer and Few-Layer Graphenes,” Nano Letters, 10, 4363–4368 (2010).

P.E. Hopkins, P.M. Norris, M.S. Tsegaye, and A.W. Ghosh, “Extracting Phonon Thermal Conductance Across Nanoscale Junctions: Nonequilibrium Green’s Function Approach Compared to Semiclassical Methods,”Journal of Applied Physics, 106, 063503 (2009).

J.C. Duda, J.L. Smoyer, P.M. Norris, and P.E. Hopkins, “Extension of the Diffuse Mismatch Model for Thermal Boundary Conductance between Isotropic and Anisotropic Materials,” Applied Physics Letters95, 031912 (2009).

Prasher, R. S., Hu, X. J., Chalopin, Y., “Turning Carbon Nanotubes from Exceptional Heat Conductors into Insulators,” Physical Review Letters, 102,  105901 (2009).

Prasher, R.,  “Acoustic Mismatch Model for Thermal Contact Resistance of van der Waals Contacts,” Applied Physics Letters, 94, 041905 (2009).

P.E. Hopkins, J.L. Kassebaum, and P.M. Norris, “Effects of Electron Scattering at Metal-Nonmetal Interfaces on Electron-Phonon Equilibration in Gold Films,” Journal of Applied Physics105, 023710 (2009).

P.E. Hopkins and P.M. Norris, “Contribution of Ballistic Electron Transport to Energy Transfer During Electron-phonon Nonequilibrium in Thin Metal Films,” Journal of Heat Transfer131, 043208 (2009).

P.M. Norris and P.E. Hopkins, (Invited), “Examining Interfacial Diffuse Phonon Scattering through Transient Thermoreflectance Measurements of Thermal Boundary Conductance,” Journal of Heat Transfer131, 043207 (2009).

P.E. Hopkins and P.M. Norris, “Relative Contribution of Inelastic and Elastic Phonon Scattering on Thermal Boundary Conductance Across Solid Interfaces,” Journal of Heat Transfer131, 022402 (2009).

Tong, T., Zhao, Y., Delzeit, L.,  “Height Independent Compressive Modulus of Vertically Aligned Carbon Nanotube Arrays,” Nano Letters, 8(2) pp. 511-515 (2008).

P.E. Hopkins, J.C. Duda, R.N. Salaway, J.L. Smoyer, and P.M. Norris, “Effects of Intra- and Interband Transitions on Electron-Phonon Coupling and Electron Heat Capacity After Short-Pulsed Laser Heating,” Nanoscale and Microscale Thermophysical Engineering12, 320-333 (2008).

Prasher, R.S., Tong, T., and Majumdar, A., “An Acoustic and Dimensional Mismatch Model for Thermal Boundary Conductance Between a Vertical Mesoscopic Nanowire/Nanotube and a Bulk Substrate.” J. Applied Physics, 102, 104312 (2007).


Conference Presentations:

Chu, R.-S. , Zhao, Y., and Grigoropoulos, C.P., and Majumdar, A., “Effect of Copper Surface Roughness on Thermal Conductance of Copper/Carbon Nanotube Array Interface ,” Proceedings of 13th IEEE Intersociety Conference on Thermal and Thermal Mechanical Phenomena in Electronic Systems, ITHERM2012-2992 (May 2012).

Chu, R.-S. , Zhao, Y., Grigoropoulos, C.P., Dubon, O.D., and Majumdar, A., “Aligned Carbon Nanotube Array for Ultra-high Interfacial Conductance,” MRS Spring 2012 Meeting (April  2012).

Smoyer, J. L., Duda, J.C., Norris, P.M., Lichtenberger, A.W.“Thermal Boundary Conductance Between Thin Metal Films and Graphite Substrates,” Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference, Honolulu, Hawaii (March, 2011).

Duda, J.C., Smoyer, J.L., Norris, P.M., Hopkins, P.E., and Beechem, T.E., “First Approximations of Phonon Thermal Transport at Solid-Graphite Interfaces,” 2010 Spring MRS Meeting.  (March, 2010)

Chu, R-S. , Zhao, Y., and Majumdar, A., “Characterization of Carbon Nanotube Array Based Thermal Interface Material after Bonding Process,” Proceedings of 14th International Heat Transfer Conference, IHTC14-22989 (2010).

Norris, P.M., Duda, J.C., and Smoyer, J.L., “Prediction and Measurement of Thermal Transport Across Interfaces Between Isotropic Solids and Graphitic Materials,” keynote lecture and invited paper, Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010-ICNMM (2010).

English, T.S., Duda, J.C., Jordan, D.A., Norris, P.M, and Zhigilei, L.V., “The Effect of Interstitial Layers on Thermal Boundary Conductance Between Lennard-Jones Crystals,”  Proceedings of 14th International Heat Transfer Conference, IHTC14-22953 (2010).

Chu, R-S. , Zhao, Y., and Majumdar, A., “Transient Thermo-reflectance Method for Characterization of Thermal Interface Material Based on Carbon Nanotube Array,” Proceedings of 2nd Micro/Nanoscale Heat & Mass Transfer International Conference, MNHMT 2009-18306. (December, 2009)

Thrust 2

Journal Articles:

Park, J.Y., Min, C.K., Granick, S. and Cahill, D.G., “Heat Transfer Rate when Water Droplets Hit a Scalding Surface,” Journal of Heat Transfer, in press (2012).

Chang-Ki Min, Kejia Chen, Sung Chul Bae, David G. Cahill, and Steve Granick, “Heat Transfer at Solid-gas Interfaces by Photoacoustics at Brillouin Frequencies,” Journal of Physical Chemistry C, 116, 10896-10903 (2012).

Zenghui Zhao, Yoav Peles and Michael K. Jensen, “Properties of Metallic Wire Mesh Screens,”  International Journal of Heat Mass Transfer (submitted in July 2012).

Basu, S., Ndaos, S., Michna, G. J., Peles, Y., and Jensen, M. K., “Flow Boiling of R134a in Circular Microtubes. Part I: Study of Heat Transfer Characteristics,” ASME Journal of Heat and Transfer, 133(5), 051502. (2011)

Basu, S., Ndaos, S., Michna, G. J., Peles, Y., and Jensen, M. K.,”Flow Boiling of R134a in Circular Microtube. Part II: Study of Critical Heat Flux Condition,” ASME Journal of Heat and Transfer, 133(5), 051503. (2011)

Michna, G.J., Browne, E.A., Jensen, M.K., and Peles, Y., “The Effect of Area Ratio on Microjet Array Heat Transfer,” International Journal of Heat and Mass Transfer, 54(9-10), pp.1782-1790. (April 2011)

Min, C.K., Cahill, D.G., and Granick, S., Time-resolved Ellipsometry for Studies of Heat Transfer at Liquid/Solid and Gas/Solid Interface“Time-resolved Ellipsometry for Studies of Heat Transfer at Liquid/Solid and Gas/Solid Interfaces,” Review of Scientific Instruments, 81(7), 074902 (2010).

Browne, E.A., Michna, G.J., Jensen, M.K., and Peles, Y., “Microjet Array Single-Phase and Flow Boiling Heat Transfer with R134a,” International Journal of Heat and Mass Transfer, 53, pp.5027-5034 (2010)

Krishnamurthy, S. and Peles Y., 2010, “Flow Boiling on Micro Pin Fins Entrenched Inside a Microchannel — Flow Patterns and Bubble Dynamics,” ASME Journal of Heat Transfer, 132(4), 041002. (April 2010)

Krishnamurthy, S. and Peles Y., 2010, “Flow Boiling Heat Transfer on Micro Pin Fins Entrenched in a Microchannel,” ASME Journal of Heat Transfer, 132(4), 041007. (April 2010)

Browne, E.A., Michna, G.J., Jensen, M.K., and Peles Y., 2010, “Experimental Investigation of Single-phase Microjet Array Heat Transfer,” ASME Journal of Heat Transfer, 132, 041013. (April 2010)

Ndao, S., Peles, Y., and Jensen, M.K., 2009, “Multi-objective Thermal Design Optimization and Comparative Analysis of Electronics Cooling Technologies,” International Journal of Heat and Mass Transfer, 52(19-20), pp. 4317-4326. (September 2009)

Jensen, M.K. and Roday, A.P., 2009, “A Review of the Critical Heat Flux Condition in Mini-and Microchannels,” Journal of Mechanical Science and Technology, 23(9), pp.2529-2547. (September 2009)

Roday, A.P.  and Jensen, M.K., “Study of the Critical Heat Flux Condition with Water and R-123 during Flow Boiling in Microtubes. Part I – Experimental Results and Discussion of Parametric Effects,” International Journal of Heat and Mass Transfer, 52, pp. 3235-3249.  (June 2009)

Roday, A.P.  and Jensen, M.K., “Study of the Critical Heat Flux Condition with Water and R-123 during Flow Boiling in Microtubes. Part II – Comparison of Data with Correlations and Establishment of a New Subcooled CHF Correlation,” International Journal of Heat and Mass Transfer, 52, pp. 3250-3256.  (June 2009)

Min, C.K., Park, J. Y., Cahill, D. G., and Granick, S., “Fast, Spatially-Resolved Thermometry of Si and GaP Crystals using Pump-Probe Two-Photon Absorption,” Journal of Applied Physics, 106, 013102 (6), (2009).

Krishnamurthy, S. and Peles Y., “Surface Tension Effects on Adiabatic Gas-liquid Flow Across Micro Pillars,” International Journal of Multiphase Flow, 35 1), pp. 55-65 (2009).

Ndao, S., Peles, Y., and Jensen, M.K., “Multi-Objective Thermal Design Optimization and Comparative Analysis of Electronics Cooling Technologies,” International Journal of Heat and Mass Transfer, 10.1016/j.ijheatmasstransfer.2009.03.069 (2009).

Michna, G.J., Browne, E.A, Peles, Y., Jensen, M.K., “Single-phase Microscale Jet Stagnation Point Heat Transfer,” ASME Journal of Heat Transfer, 131, 111402 (2009).

Krishnamurthy, S. and Peles Y., “Two-phase Flow Pattern Transition Across Micro-pillars- Size Scale Effect at the Micro Scale,” Physics of Fluids, 20(2), 023602 (2008).

Krishnamurthy, S. and Peles Y., Flow Boiling of Water in a Circular Staggered Micro-pin Fin Heat SinkInternational Journal of Heat and Mass Transfer, 51(5-6), pp.1349-1364 (2008)

Roday, A.P., Borca-Tasciuc, T., and Jensen, M.K., The Critical Heat Flux Condition with Water in a Uniformly Heated MicrotubeJournal of Heat Transfer, 130, 012901 (2008).

Conference Presentations:

Derby, M., Lee, H.J., Craft, R., Michna, G., Peles, Y., and Jensen, M.K.,2010. Exploration of experimental techniques to determine the condensation heat flux in microchannels and minichannels, 2010 International Heat Transfer Conference (IHTC-14), Washington D.C., August.

Basu, S., Ndao, S., Michna, G., Peles, Y., Jensen, M.K., 2010. Heat transfer characteristics of flow boiling of R134a in uniformly heated horizontal circular microtubes, 2010 International Heat Transfer Conference (IHTC-14), Washington D.C., August.

Basu, S., Ndao, S., Michna, G., Peles, Y., Jensen, M.K., 2010. Study of CHF condition for flow boiling of R134a in circular microtubes, 2010 International Heat Transfer Conference (IHTC-14), Washington D.C., August.

Min, C-K., Granick, S., and Cahill, D. G., “Thermal Transfer Through Liquids using Time-Resolved Ellipsometry,” Gordon Research Conference on Chemistry and Physics of Liquids, Holderness, NH, August 2-7, 2009.

Parker, S., Cahill, D.G., and Granick, S.,  “Watching Heat Flow Near a Nucleating Bubble,” 2010 March Meeting of the APS, Portland, OR, March 15–19, 2010.

Park, J. Y., Min, C-K., Cahill, D. G., and Granick, S., “Cold Water Jets on a Hot Si Surface,” 2010 March Meeting of the APS, Portland, OR, March 15–19, 2010.

Min, C-K., Bae, S. C. , Cahill, D. G.,  and Granick, S., “Heat Transfer Studies at Solid/Gas Interfaces using Time-Resolved Ellipsometry,” 2010 March Meeting of the APS, Portland, OR, March 15–19, 2010.

Conference Papers Accepted and Presented:

Derby, M., Lee, H.J., Craft, R., Michna, G., Peles, Y., and Jensen, M.K., “Exploration of Experimental Techniques to Determine the Condensation Heat Flux in Microchannels and Minichannels,” accepted for presentation at the 2010 International Heat Transfer Conference (IHTC-14), Washington D.C., August, 2010.

Basu, S., Ndao, S., Michna, G., Peles, Y., and Jensen, M.K., “Heat Transfer Characteristics of Flow Boiling of R134a in Uniformly Heated Horizontal Circular Microtubes,” accepted for presentation at the 2010 International Heat Transfer Conference (IHTC-14), Washington D.C., August, 2010.

Basu, S., Ndao, S., Michna, G., Peles, Y., and Jensen, M.K., “Study of CHF Condition for Flow Boiling of R134a in Circular Microtubes,” accepted for presentation at the 2010 International Heat Transfer Conference (IHTC-14), Washington D.C., August, 2010.

Thrust 3

Journal Articles

Zhang, T.J., .Catano, J., Wen, T., Peles, Y., Jensen, M., “Dynamic Modeling and Experimental Validation of Vapor Compression Cycle for Direct Refrigeration Cooling,’’ to appear in Applied Thermal Engineering (March 2012).

Odom, B.A., Sherbeck, J.A., Prasher, R.S., & Phelan, P.E., 2012, “Heat Sink Effect on System Pressure and Mass Flow Rate in a Pumped Refrigerant Loop,” to appear in ASME Journal of Thermal Science & Engineering Applications (2012).

Derby, M., Lee, H. J., Peles, Y., and Jensen, M. K.,  “Condensation Heat Transfer in Square, Triangular, and Semi-circular Mini-channels,” International Journal of Heat and Mass Transfer, 55(1-3) pp.187-197 (2012)

Browne E., Jensen M.K., and Peles Y., “Microjet Array Flow Boiling with R134a and the Effect of Dissolved Nitrogen,” International Journal of Heat and Mass Transfer, 55(4), pp. 825-833 (2012)

Ndao S., Lee H.J., Peles Y., and Jensen M.K.,  “Heat Transfer Enhancement from Micro Pin Fins Subjected to an Impinging Jet,” International Journal of Heat and Mass Transfer, 55(1-3), pp. 413-421 (2012).

Zhang, T.J., Wen, J.T., Julius, A., Peles, Y., and Jensen, M.K., “Stability Analysis and Maldistribution Control of Two-phase Flow in Parallel Evaporating Channels,” International Journal of Heat and Mass Transfer, 54(25-26), pp. 5298–5305 (Dec, 2011).

Zhang, T.J., Wen, J.T., Peles, Y., Catano, J., Zhou, R.L., Jensen, M.K., “Two-phase Refrigerant Flow Instability Analysis and Active Control in Transient Electronics Cooling Systems,”International Journal of Multiphase Flow, 37, pp.84-97 (2011)

Phelan P.E., Gupta Y., Tyagi H., Prasher R.S., Catano J.E., Michna G., Zhou R., Wen J., Jensen M., and Peles Y.,  “Energy Efficiency of Refrigeration Systems for High-heat-Flux Microelectronics,” Journal of Thermal Science and Engineering Applications, 2, 031004 (September 2010).

Zhang, T.J., Peles, Y., Wen, J.T., Tong, T., Prasher, R., and Jensen, M.K., “Analysis and Active Control of Pressure-Drop Flow Instabilities in Boiling Microchannel Systems,” International Journal of Heat and Mass Transfer, 53, pp. 2347-2360 (May, 2010).

Zhou,R., Zhang, T.J., Catano, J., Wen, J.T., Michna, G.J., Peles, Y., and Jensen, M.K.,“The Steady-State Modeling and Design Optimization of a Refrigeration System for High Heat Flux Removal,” Applied Thermal Engineering, accepted (May, 2010).

Zhang, T.J., Tong, T., Chang, J.Y., Peles, Y., Prasher, R., Jensen, M.K., Wen, J.T., and Phelan, P., “Ledinegg Instability Microchannels,” International Journal of Heat and Mass Transfer, 52(25-26), pp.5661-5674 (December 2009).

Journal Publications Under Review:

Miner, M.J., Phelan, P.E., Odom, B.A., Ortiz, C.A., Prasher, R.S., & Sherbeck, J.A., 2012, “Optimized Expanding Microchannel Geometry for Flow Boiling,” Journal of Heat Transfer (submitted Mar, 2012)Odom, B.A., Miner, M.J., Ortiz, C.A.,

Sherbeck, J.A., Prasher, R.S., & Phelan, P.E., 2012, “Microchannel Two-Phase Flow Oscillation Control with an Adjustable Inlet Orifice,” Journal of Heat Transfer (submitted Sep, 2011)

Zhang, T.J., Wen, J.T., Julius, A., Peles, Y., and Jensen, M.K., “Stability Analysis and Maldistribution Control of Two-phase Flow in Parallel Evaporating Channels,” International Journal of Heat and Mass Transfer (submitted Mar, 2011).

Conference Presentations:

TieJun Zhang, Juan Catano, Evelyn N. Wang, Michael K. Jensen, “Pre- and Post-Critical Heat Flux Analyses in a Saturated Refrigerant Flow Boiling System”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012), November 9-15, 2012, Houston, Texas.

Miner, M.J. and Phelan, P.E., 2012, “Effect of Cross-Sectional Perturbation on Critical Heat Flux Criteria in Microchannels,” Paper No. HT2012-58082, to be presented at the ASME Summer Heat Transfer Conference, Rio Grande, Puerto Rico, July 8 – 12.

Odom, B.A., Ortiz, C.A., & Phelan, P.E., 2012, “Critical Heat Flux in Microchannels with an Adjustable Inlet Orifice,” Paper No. HT2012-58335, to be presented at the ASME Summer Heat Transfer Conference, Rio Grande, Puerto Rico, July 8 – 12.

Zhang, T., Catano, J., Wen, J. T., Jensen, M., K., “Transient Vapor Compression Refrigeration Cycle for Electronics Cooling – Part 1: Distributed Model Validation,” ASME 2011 International Mechanical Engineering Congress & Exposition (IMECE2011 ), November 11-17, 2011, Denver, Co.

Zhang, T.J., Wen, J.T., M.K. Jensen, “Transient Vapor Compression Refrigeration CycleFor Electronics Cooling – Part 2: Multi-Evaporator Dynamics & Control,” ASME 2011 International Mechanical Engineering Congress & Exposition (IMECE2011 ), November 11-17, 2011, Denver, Co.

Zhao, Z., Peles, Y., and Jensen, M.K., 2012. “Microjet Impingement Boiling on Structured-porous Surface,” ASME 2012 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, March 3-6, 2012, Atlanta, GA, MNHMT2012-75271.

Zhao, Z., Peles, Y., and Jensen, M.K., 2012. Enhanced heat transfer with jet impingement on structured – porous surfaces,” Itherm 2012, May 30 – June 1, San Diego, CA, USA, ITHERM2012-2793.

Odom, B.A., Miner, M.J., Ortiz, C.A., Sherbeck, J.A., Prasher, R.S., & Phelan, P.E., 2011, “Microchannel Two-Phase Flow Oscillation Control with an Adjustable Inlet Orifice,”  Paper No. IMECE2011-62078, Proceedings of ASME 2011 International Mechanical Engineering Congress & Exposition,  Denver, Colorado, Nov 11 – 17.

Miner, M.J., Phelan, P.E., Odom, B.A., Ortiz, C.A., Sherbeck, J.A., & Prasher, R.S., 2011, “Optimized Expanding Microchannel Geometry for Flow Boiling,” Paper No. IMECE2011-63592, Proceedings of ASME 2011 International Mechanical Engineering Congress & Exposition,  Denver, Colorado, Nov 11 – 17.

Wen, J.T. and Zhang, T.J., 2011. Stability analysis and control design of a two-phase cooling system, accepted for presentation at the 18th IFAC World Congress , Milan, Italy, Aug.28-Sep. 2, 2011.

Zhang, T.J., Peles, Y., Wen, J.T., and Jensen, M.K., 2010, Active flow instability control for transient two-phase electronics cooling, 2010 International Heat Transfer Conference (IHTC-14), Washington D.C., August.

Zhang, T.J., Wen, J.T., Peles, Y., Tong, T., Prasher, R., and Jensen, M.K., 2010. Micro-thermal-fluid transient analysis and active control for two-phase microelectronics cooling, 6th IEEE Conference on Automation Science and Engineering (CASE 2010), Toronto, Canada, August.

Zhang, T.J., Wen, J.T., Julius, A., Peles, Y., and Jensen, M.K., 2010. Extremum-seeking micro-thermal-fluid control for active microelectronics cooling, 49th IEEE Conference on Decision and Control (49th CDC), Atlanta, USA, December.

Catano, J., Zhang, T.J., Zhou, R., Peles, Y., Jensen, M.K., Wen, J.T., 2010. Experimental model identification and controller design of a vapor compression refrigeration cycle for electronics cooling, 2010 ASME International Mechanical Engineering Congress & Exposition (IMECE 2010), Vancouver, BC, Canada, November, IMECE2010-39155.

Catano, J., Zhang, T., Jensen, M.K., Peles, Y., and Wen, J.T., 2010, “Experimental Identification of Evaporator Dynamics for Vapor CompressionRefrigeration Cycle During Phase Transition,” ITherm 2010: Twelfth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, Las Vegas, Nevada, June.

Zhang, T.J., Wen, J.T., Julius, A., Bai, H., Peles, Y., and Jensen, M.K., 2010, “Parallel-channel Flow Instabilities and Active Control Schemes in Two-phase Microchannel Heat Exchanger Systems,” 2010 American Control Conference, Baltimore, Maryland, June/July.

Zhang, T.J., Peles, Y., Wen, J.T., and Jensen, M.K., 2010, ” Two-phase Flow Instability Analysis for Transient Electronics Cooling,” ITherm 2010: Twelfth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, Las Vegas, Nevada, June.

Catano, J., Zhang, T., Zhou, R., Michna, G.J., Jensen, M.K., Peles, Y., and Wen, J.T., 2009, “Experimental Identification of Component Parameters for Multiple-Evaporator Vapor Compression Refrigeration Cycle,” International Mechanical Engineering Congress and Exposition, November 13-19, Lake Buena Vista, FL, IMECE2009-11778.

Zhou, R., Catano, J., Zhang, T.J., Wen, J.T., Michna, G.J., Peles, Y., and Jensen, M.K., 2009, “The Steady-State Modeling and System Design of a Two-Loop Refrigeration System for High Heat Flux Removal,” International Mechanical Engineering Congress and Exposition, November 13-19, Lake Buena Vista, FL, IMECE2009-11500.

Zhang, T.J., Wen, J.T., Catano, J., and Zhou, R., 2009, “Stability Analysis of Heat Exchanger Dynamics,” 2009 American Control Conference, St. Louis, MO, June 10-12, 2009.

Zhang, T., Wen, J.T., Catano, J., Zhou, R., Michna, G., Peles, Y., and Jensen, M.K., 2009, “Stability analysis of refrigeration systems for electronics cooling,” 25th Annual Thermal Measurement, Modeling and Management Symposium, SEMI-THERM 25, March 15-19, San Jose, CA.

Zhang, T., Catano, J., Zhou, R., and Wen, J.T., 2008, “Dynamic modeling of refrigeration cycle for electronics cooling,” ASME IMECE, November 2-6, Boston, MA, IMECE2008-69074.

Zhou, R., Catano, J., Zhang, T., Wen, J.T., Michna, G., Peles, Y., and Jensen, M., 2008, “The steady-state modeling and static system design of a refrigeration system for high heat flux removal,” ASME IMECE, November 2-6, Boston, MA, IMECE2008-69074.  (To be submitted for journal publication.)

P.E. Phelan, Y. Gupta, H. Tyagi, R.S. Prasher, J. Cattano, G. Michna, R. Zhou, J. Wen, M. Jensen, and Y. Peles, 2008, “Optimization of Refrigeration Systems for High-Heat-Flux Microelectronics,” Paper No. IMECE2008-69113, ASME International Mechanical Engineering Congress & Exposition, Boston, Massachusetts, November 2 – 6.

Prasher, R., and Chang, Je-Young, 2008, “Cooling of Electronic Chips Using Microchannel and Micro-Pin Fin Heat Exchangers,” Proceedings of the Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels, Darmstadt, Germany.

Conference Papers Submitted

Zhao, Z., Peles, Y., and Jensen, M.K., 2012. Enhanced liquid jet impingement boiling, International Mechanical Engineering Congress & Exposition, November 9-15, Houston, Texas, IMECE2012-89265.



Advertisements



%d bloggers like this: